Low-force helix

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (November 2017) (Learn how and when to remove this message) This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Low-force helix" – news · newspapers · books · scholar · JSTOR (November 2017) (Learn how and when to remove this message) (Learn how and when to remove this message)

A low-force helix (LFH-60) is a 60-pin electrical connector (four rows of 15 pins) with signals for two digital and analog connectors. Each of the pins is twisted approximately 45 degrees between the tip and the plastic frame which holds the pins in place. Hence "helix" in the name.

The DMS-59 is a derivative of the LFH60.

The LFH connector is typically used with workstations, because it can connect a single computer graphics source to up to four different monitors. The standard interface is a 60-pin LFH connector with two breakout VGA or DVI cables. This system provides users with flexibility for a variety of display configurations, though forsakes standard DVI or VGA connectors. This renders the LFH connector unusable without an adapter.

It's also used in HDCI (High Definition Camera Interface) used in Polycom HDX video conferencing systems.

Using the LFH interface requires a graphics card with multi-monitor capabilities and an LFH port. NVIDIA and Matrox used to manufacture such cards.

The LFH connector is used in some Cisco routers and WAN Interface Cards.^[1]

• DMS-59
• Molex
• very-high-density cable interconnect standardized as SCSI interface which is often used to carry four digital/analog monitor signals

• Molex DMS-59 Product Page